Standard PerformanceThe velocity of the particles is determined by the air pressure and length
Aplikasi WhatsApp: +86 13816217984
Email :info@qinsun-lab.com
The velocity of the particles is determined by the air pressure and length of nozzle. A wide range of velocities is covered from 25 to 80 m/s and a feed rate of 0.2 to 2 g/minute.
By enclosing the particle feed assembly in a small chamber and applying a pressure of up to 4 bar, the particle velocity can be increased from a nominal maximum of 80 m/s to 120 m/s. The pressure differential between the mixing chamber and the nozzle discharge remains approximately 1 bar, indicating a pressure drop of 3 bar between the particle feed chamber and venturi injector.
A definitive investigation of the relationship between the pressure differentials between the feed assembly chamber, the mixing chamber, the injector upstream pressure and the nozzle discharge pressure and the resulting particle flow rate has yet to be completed. However, the addition of the feed chamber, which is now fitted as standard, does produce a measurable increase in particle velocity under certain user adjusted test conditions.
| Standard Performance | |
| Velocity: | 25 to 80 m/s at 1.5 bar pressure |
| Feed Rate: | 0.2 to 2 g/minute. |
| Enhanced Performance | |
| Maximum Velocity: | 120 m/s at 4 bar pressure |
| Service Requirements | |
| Clean, dry air: | 1.5 bar and 3.5 c.f.m. flow rate for speeds up to 80 m/s |
| 4 bar and unspecified flow rate for speeds up to 120 m/s | |
| Electricity: | 220/240V, single phase, 50 Hz, 1.5 kW |
| Installation | 1.000 mm wide x 1.200 mm high x 400 mm deep on floor standing frame |
Penafian: Konten di atas hanya untuk referensi dan komunikasi antara orang dalam industri, dan tidak menjamin akurasi atau kelengkapannya. Menurut hukum dan peraturan yang relevan dan peraturan situs web ini, unit atau individu yang membeli barang terkait harus memperoleh kualifikasi dan kondisi kualifikasi yang valid.
Telepon Perusahaan
+86-21-6420 0566
Jam kerja
Senin sampai Jumat
Telepon seluler:
13816217984
Email:
info@qinsun-lab.com
