Thermal Shock Chamber

Detailed Product Description

Description 

High formula memory capacity may be set to 120 patterns. The maximum cycle setting is 9999cycles. The maximum setting of each section is 999 Hrs 59 Mins.

Provide with RS-232C communication interface device, capable of controlling / editing/ recording in the linkage with the computer and two set dynamic connection point and convenient application.

Both 2 zone and 3 zone shocks can be chosen.

All equipment is fully automatic, and all process are precisely controlled with P.L.C.’S.

Of any part of the malfunctions, the machine will automatically shuts down and a warning light switches on.

Machine can be shut down automatically in case of electrical power instabilities.

Internal Dimension: (W×H×D)50×50×50 cm

Structure: Two chambers design(the hot chamber or the cold chamber)

Damper device: Forced air drive damper

Interior material: SUS# Stainless steel plate

Exterior material: SUS# Stainless steel plate

Basket material: SUS# Stainless steel plate

Refrigeration: Cascade refrigeration system

Cooling method: Water

Ambient temperature: 0°~30°

Preheating temperature: above freezing 60.00°C~above freezing200.00°C

Pre-cooling temperature: subzero 10.00°~ subzero 70.00°C

H.T. Shocking: above freezing 60.00°C~above freezing 150.00°C

L.T. Shocking: subzero 10.00°C~subzero 65.00°C

Temperature uniformity: ±2.00°C

Simulated load ic 5.0kg

HT IN-Zone subzero 65.00°C~above freezing 150.00°C/5min

LT IN-Zone above freezing 150.00°C subzero 65.00°C

Preheating time: 45MIN

Pre-cooling time: 75MIN

Aplikasi

Thermal Shock Chambers perform tailored environmental stress screening of component and board electronic assemblies

Thermal Shock Chambers make it possible to automatically and repeatedly transfer a test item from a hot environment to a cold environment or from a cold environment to a hot environment. This process is defined as true thermal shock and it is different from thermal cycling, where the specimen is introduced into the chamber and the chamber temperature is then cycled.

2-Zone/3-Zone design available

With hot/cold transfer system

LCD touch screen controller

Program up to 100 patterns with maximum 9999 cycles

With RS-232C communication interface

Meet Mil-Std standard