Features and Benefits1.Key environmental parameters such as temperature salt spray concentratio
Aplikasi WhatsApp: +86 13816217984
Email :info@qinsun-lab.com
1.Key environmental parameters such as temperature salt spray concentration are precisely controlled, which simulates the corrosion environment that metal materials may encounter under different climatic conditions and use scenarios.
2. With a cyclic test mode, you can cycle switch stages such as salt spray - drying - wetting - standing, which can better simulate the dry and wet alternations and temperature changes experienced by metal materials, so as to more accurately evaluate the material's resistance to filament-like corrosion.
3. Accelerate filamentous corrosion in a short time to quickly assess the corrosion resistance of materials. The wire corrosion tester can greatly shorten the test cycle and improve the test efficiency.
4. Simultaneous testing of multiple samples allows for rapid screening and evaluation during mass production and development. Multiple samples tested under the same test conditions can also improve the repeatability and comparability of test results.
① Workroom |
|
② Spray tower |
|
③ Heater strip | Located at the bottom of the workroom to meet the temperature conditions required for testing. |
④ Saturated barrel | Preheat the air entering the spray tower. Make the air contain enough moisture to achieve saturation. |
⑤ Controller | Set and control various parameters of the test, such as temperature, spray time, test cycle, etc., to ensure the accuracy and repeatability of the test. |
⑥ Salt solution tank |
|
⑦ Air source(Option) |
|
Model | STD S-150 | STD S-250 | STD S-750 | STD S-010 |
Internal dimensions (mm) | 590*470*400 | 1000*640*500 | 1100*750*500 | 1000*1300*600 |
Overall dimensions (mm) | 1460*760*1140 | 1850*960*1350 | 1950*1030*1350 | 2000×1300×1600 |
Interior Volume (L) | 110 | 320 | 410 | 780 |
Jarak Suhu | Ambient ～ +60 ℃ | |||
Temperature Fluctuation | ± 0.5 ℃ | |||
Temperature Deviation | ± 2.0 ℃ | |||
Humidity Range | 95% ~ 98% RH | |||
Salt Fog Deposition | 1～2ml / 80cm2 · h | |||
Spray Type | Continuous / Periodic | |||
Salt Fog Collected | Fog collector and fog measure cylinder | |||
Air Preheating | Saturated air barrel | |||
Spraying System | Atomizer tower and Spray nozzles | |||
Controller | PID controller | |||
Safety Device | Humidifier Dry-combustion Protection; Over-temperature Protection; Over-current Protection; Water Shortage Protection; Earth leakage Protection | |||
Material | Glass fiber reinforced plastics | |||
Standard Configuration | 6 round bars and 5 V-shaped grooves | |||
Penafian: Konten di atas hanya untuk referensi dan komunikasi antara orang dalam industri, dan tidak menjamin akurasi atau kelengkapannya. Menurut hukum dan peraturan yang relevan dan peraturan situs web ini, unit atau individu yang membeli barang terkait harus memperoleh kualifikasi dan kondisi kualifikasi yang valid.
Telepon Perusahaan
+86-21-6420 0566
Jam kerja
Senin sampai Jumat
Telepon seluler:
13816217984
Email:
info@qinsun-lab.com
