DescriptionThe rig is constructed with similar geometry to a conventional lathe, comprising a “
Aplikasi WhatsApp: +86 13816217984
Email :info@qinsun-lab.com
The rig is constructed with similar geometry to a conventional lathe, comprising a “head-stock”, for carrying shaft samples, a “tail-stock”, mounting a combined axial force and radial torque transducer, and a “tool-post”, for mounting a specimen and applying a radial force.
The head-stock and tail-stock assemblies are mounted on standard linear slide, on bearing blocks, with manual clamps.
| Maximum Radial Load: | 5 kN |
| Bearing/Shaft Diameter: | 5 to 30 mm |
| Spindle Taper: | DIN 69871A, taper ISO 50 |
| Rotary Motion: | |
| Speed: | 0 to 2000 rpm |
| Continuous Torque: | 56.4 Nm |
| Peak Torque: | 136 Nm |
| Oscillating Motion: | |
| Amplitude: | Variable 0 to +/-20° |
| Frequency: | 0.001 to 1 Hz |
| Axial Motion: | |
| Maximum Thrust: | 5 kN |
| Stroke: | 0 to 30 mm |
| Frequency: | 0.001 to 1 Hz |
| Air Bearing: | |
| Input Pressure | 0.41 MPa |
| Ideal Load at 5um Fly Height | 6672 N |
| Stiffness | 1009 N/μm |
| Flow | 4.96 NLPM |
| Fly Height | 5 microns |
| Porous Media Material | Carbon |
| Viable Pressure Range | 0.414 – 0.552 MPa |
| Maximum Allowable Pressure Supply | 0.689 MPa |
| Common Guide Surfaces | Hard-coated aluminium |
| Guide Surface Finish | 16 RMS |
| Controlled Parameters | Frequency (rotational, oscillatory, reciprocating) |
| Amplitude (oscillatory, reciprocating) | |
| Test Duration | |
| Load | |
| Measured Parameters | Frequency |
| Amplitude | |
| Load | |
| Friction Torque | |
| Axial Friction Force | |
| RMS Friction | |
| Contact Potential | |
| Services | |
| Electricity: | 380/415V, three phase plus neutral, 50/60 Hz, 20 kW |
| Air: | 4 cfm at 8 bar (120 psi) |
Penafian: Konten di atas hanya untuk referensi dan komunikasi antara orang dalam industri, dan tidak menjamin akurasi atau kelengkapannya. Menurut hukum dan peraturan yang relevan dan peraturan situs web ini, unit atau individu yang membeli barang terkait harus memperoleh kualifikasi dan kondisi kualifikasi yang valid.
Telepon Perusahaan
+86-21-6420 0566
Jam kerja
Senin sampai Jumat
Telepon seluler:
13816217984
Email:
info@qinsun-lab.com
