Molten metal tester counts drops until specimen temperature rises 40°C.
Email: info@standard-groups.com
The instrument is used for determining the behavior of materials exposed to small splashes of molten metal. A welding wire is melted by a burner and drops onto the specimen. The number of molten drops which drop on one point of the vertically fixed specimen is counted until the temperature in the temperature sensor behind the specimen rose by 40°C. The burner is adjusted by a mass-flow meter with manual control valve. The skipping speed of the welding wire can be adjusted as well. The power supply for the controller is provided by an IEC-320 AC power cord set 230 VAC (50/60 Hz).
Parameter Teknik
| Item | Parameter |
| Sample geometry | Textiles |
| Test standards | DIN EN 348 |
| Sensory function | Temperature |
| Kuasa | 230 VAC / 30 VA Oxygen / Acetylen |
| Dimension | 1200 x 1000 x 600 mm (W x D x H) |
| Berat | Ca. 50kg |
Penafian: Konten di atas hanya untuk referensi dan komunikasi antara orang dalam industri, dan tidak menjamin akurasi atau kelengkapannya. Menurut hukum dan peraturan yang relevan dan peraturan situs web ini, unit atau individu yang membeli barang terkait harus memperoleh kualifikasi dan kondisi kualifikasi yang valid.
Telepon Perusahaan
+86-21-6420 0566
Jam kerja
Senin sampai Jumat
Telepon seluler:
13816217984
Email:
info@qinsun-lab.com
